Search filter
Search filter
Products
Provider
Category
Manufacturer
Products ()
Merchants ()
Manufacturers ()

HSC 70 linear (Reference-Nr. 055065)

Request about this Machine
Asking price


  • Reference number Reference number 055065
    Manufacture Year Manufacture Year 2015
    Operation Hours Operation Hours not applicable
  • Vendor

    DMG MORI Global Marketing GmbH
    Walter-Gropius-Str.7
    80807 München
    GermanyGermany
    Showroom Logo
  • Main Category

    Metal working machines
  • Category

    Machining centres
  • Type of Machine

    High Speed Machining Centers (HSC)
  • Manufacturer

    DMG MORI
  • Control

    Siemens
  • Description


    General
    Precision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate
    Technical Data
    Spindle taper HSK-A 63
    Feed rate longitudinal/transverse/vertical 1-80000/1-80000/1-80000 mm/min
    Rapid traverse longitudinal/transverse/vertical 80/80/80 m/min
    Working area 1
    Longitudinal 650 mm
    Cross 600 mm
    Vertical 380 mm
    Tool changer
    Type of magazine Chain
    Type of gripper Double gripper
    Number of tools 120
    Floor space/Weight
    Dimensions (L x W x H) 7,28 x 6,63 x 3 m
    Weight approx. 9600 Kg
  • Specification


    Rigid table Rigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbs
    Spindle speed up to 28,000rpm Shaft Cooling Spindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machine Protection Control (differently from standard)
    Drive power (100% DC) 20 kW
    Drive power (40% DC) 30 kW
    Speed range 20 - 28000 rpm
    Spindle taper HSK-A 63
    Chain-type tool magazine 120 pockets Werkzeugmagazin 120 Plätze Kettenmagazin mit Doppelgreifer
    Infrared measuring probe TS 649 Infrared touch probe make Heidenhain TS 649
    Tool Measuring Blum Laser Tool measuring Blum Laser Non-Contact optical tool measuring system including calibration tool
    Signal lamp 4-colour Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Production package 980l ICS coolant tempering Production package coolant tempered with internal coolant supply (ICS) Special coolant temperature control for more kinematic stability. Including paperband filter, coolant tempering and stirring device, swarf conveyor (scraper type) 40 bar/23 l/min/ 980
    Air blast through spindle centre dry Air blast through spindle centre (dry) activated by M function, (up 28.000rpm and higher)
    High-Speed-Settings High-Speed-Settings Selection of the optimal milling mode for the next machining-step.
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    Safety glass at operators door and side panel Laminated safety glass at operators door and side panel
    Special equipment Preparation PH 150-8 - automatic lift door at the front cabin side - 4-channel media feed to theStarr table - standard electrical interfaceProfibus with DNC extension of DMG MORI Systems * pneumatic control u. Monitoring the zero point clamping syst
  • State

    Used

Send request

More products from DMG MORI Global Marketing GmbH

Load